{"lien_WSTV":"","tax_name":"deprecated","tax_rate":20,"id_manufacturer":"0","id_supplier":"0","id_category_default":"473","id_shop_default":"1","manufacturer_name":false,"supplier_name":false,"name":"Luminor Marina Automatic","description":"<strong>Luminor Marina Automatic<\/strong><br \/><br \/>Luminor and Marina, two names that bring to mind Officine Panerai\u2019s specialist vocation, the construction of watches designed to be worn often, if not continuously, underwater, and for that reason equipped with an extremely luminous dial.<br \/><br \/>Created during the Second World War, the Luminor design was a development of the first professional diver\u2019s model in history, the Radiomir, the watch selected by the Italian Navy for its underwater commandos from 1938. In contrast with the Radiomir, the Luminor used a luminous material for its dial based on tritium rather than radium, but the greatest and most substantial difference was the system for making the winding crown water-resistant. The Radiomir had a screw-down crown and, since it needed to be unscrewed and screwed up again every time the watch was wound or adjusted, after long use the crown could become worn, running the risk of letting in water. To solve this problem, Panerai designed a completely new device consisting of a lever inserted in a bridge fixed to the case. By moving the lever upwards, the crown was released so that the watch could be wound and the hands adjusted freely; but when the lever was moved down again, it applied pressure to the crown, pushing it against the case itself and compressing the seals to ensure a degree of water-resistance that was otherwise impossible to achieve.<br \/><br \/>From then on all the Luminor models had the bridge and lever device which, continuously improved over time, can now protect the watch at depths of up to 300 metres and is capable of withstanding even greater pressures, as is demonstrated by the tests to which every example is subjected. These are characteristics which are part of the DNA of the new Luminor Marina Automatic 44 mm. This has its caseband, back and lever bridge executed in brushed steel, with a contrasting polished steel bezel. This contrast between surfaces achieved by different styles of finish is also a feature of the new bracelet, designed not only to enhance the aesthetic value of the watch, but above all to blend more harmoniously with the case. The solution of continuity between the case and the bracelet is in fact almost invisible, as a result of the precise fitting of the first two links between the upper and lower lugs, and also because these links fit perfectly against the caseband, following its rounded shape. The aim of the new design was to create a bracelet that was so naturally integrated with the case that it appears to be a perfect extension of it, as if the case and the bracelet were created at the same time and designed by the same hand. The Luminors were originally made with a long die-cut leather strap and the engineers of Officine Panerai have had to work hard to give the new bracelet the special \u201csuppleness\u201d that is characteristic of leather. This objective has been achieved by the particular way in which the links are shaped; they are asymmetrical and formed with a double-curved surface, so that they are rounded longitudinally, as well as across. This detail means that the bracelet is not only pleasant to the touch, but also very comfortable to wear, due also to the fact that the width of the links reduces from 24 mm wide at the case to 20 mm wide at the closure; and, from an aesthetic point of view, it looks like an integral part of the case.<br \/><br \/>But there is a further sophistication: the links have a brushed finish, but at the points of contact the steel has been mirror-polished, so as to provide a contrasting finish similar to that of the caseband and the bezel. The new bracelet does not replace either the previous one or the traditional straps of alligator or rubber; it is easily interchangeable with them, giving the client a wide choice.","description_short":"","quantity":0,"minimal_quantity":"1","available_now":"","available_later":"","price":5500,"specificPrice":false,"additional_shipping_cost":"0.00","wholesale_price":"0.000000","on_sale":"0","online_only":"0","unity":"","unit_price":0,"unit_price_ratio":"0.000000","ecotax":"0.000000","reference":"PAM00048","supplier_reference":"","location":"","width":"0.000000","height":"0.000000","depth":"0.000000","weight":"0.000000","ean13":"","upc":"","link_rewrite":"luminor-marina-automatic","meta_description":"Luminor Marina AutomaticLuminor and Marina, two names that bring to mind Officine Panerai\u2019s specialist vocation, the construction of watches designed to be w...","meta_keywords":"","meta_title":"Watch Panerai Luminor Marina Automatic | Luminor PAM00048 Steel - Aligator Bracelet","quantity_discount":"0","customizable":"0","new":false,"uploadable_files":"0","text_fields":"0","active":"1","redirect_type":"","id_product_redirected":"0","available_for_order":"0","available_date":"0000-00-00","condition":"new","show_price":"1","indexed":"1","visibility":"both","date_add":"2015-08-03 22:47:21","date_upd":"2015-09-30 12:27:23","tags":false,"base_price":"5500.000000","id_tax_rules_group":"1","id_color_default":0,"advanced_stock_management":"0","out_of_stock":0,"depends_on_stock":false,"isFullyLoaded":true,"cache_is_pack":"0","cache_has_attachments":"1","is_virtual":"0","id_pack_product_attribute":null,"cache_default_attribute":"0","category":"luminor","pack_stock_type":"3","id":2433,"id_shop_list":null,"force_id":false,"customization_required":false}
{"Compl\u00e9ment":"Steel - Aligator Bracelet","Statut de vente":"Non precis\u00e9","Pi\u00e8ce unique":"No","S\u00e9rie limit\u00e9e":"No","Sexe":"Homme","Gaucher":"No","Diam\u00e8tre":"40","Types":"Self-winding","Styles":"Sporty","Calibre_autre":"Panerai OP III","Calibre distinction":"C\u00f4tes de Gen\u00e8ve, COSC certified, Chronometer","Affichage":"Luminescent hands","Complication":"Small Seconds","Mati\u00e8re du bo\u00eetier":"Steel","Particularit\u00e9 du boitier":"Screwed-down caseback","Particularit\u00e9 du boitier_autre":"Crown protector, Back in stainless steel","Etanch\u00e9it\u00e9":"300 meters","Forme":"Cushion","Couleur du cadran":"Black","Index":"Luminescent, Arabic numerals, Baton-type","Verre":"Antireflective coating, Magnifying glass, Sapphire","Mati\u00e8re du bracelet":"Alligator leather","Fermeture du bracelet":"Pin buckle","Couleur du bracelet":"Brown","Plus de caract\u00e9ristiques":"Movement<br \/>13\u00bc lignes<br \/>C\u00f4tes de Gen\u00e8ve decoration on the bridges <br \/>PANERAI personalised oscillating weight<br \/>Glucydur balance <br \/>Frequency:<br \/>28.800 alternations per hour<br \/>Incabloc anti-shock device<br \/>Power-reserve of 42 hours<br \/><br \/>Device protecting the crown in polished steel<br \/><br \/>Strap with PANERAI personalised buckle "}
Luminor Marina Automatic
PAM00048
| Brand : | Panerai |
| Collection : | Luminor |
| Model : | Luminor Marina Automatic |
| Reference : | PAM00048 |
| Complement : | Steel - Aligator Bracelet |
-
Brand : Panerai Collection : Luminor Model : Luminor Marina Automatic Reference : PAM00048 Complement : Steel - Aligator Bracelet List Price : 6 600 € Diameter : 40 mm Styles : Sporty Types : Self-winding Calibre : Panerai OP III Calibre distinction : Côtes de Genève COSC certified Chronometer Complication : Small Seconds Case material : Steel Case peculiarity : Screwed-down caseback Crown protector Back in stainless steel Shape : Cushion Water-resistance : 300 meters Dial color : Black Display : Luminescent hands Indexes : Luminescent Arabic numerals Baton-type Glass : Antireflective coating Magnifying glass Sapphire Strap material : Alligator leather Strap color : Brown Strap clasp : Pin buckle + More characteristics : Movement
13¼ lignes
Côtes de Genève decoration on the bridges
PANERAI personalised oscillating weight
Glucydur balance
Frequency:
28.800 alternations per hour
Incabloc anti-shock device
Power-reserve of 42 hours
Device protecting the crown in polished steel
Strap with PANERAI personalised buckle
DESCRIPTION
- Luminor Marina Automatic
Luminor and Marina, two names that bring to mind Officine Panerai’s specialist vocation, the construction of watches designed to be worn often, if not continuously, underwater, and for that reason equipped with an extremely luminous dial.
Created during the Second World War, the Luminor design was a development of the first professional diver’s model in history, the Radiomir, the watch selected by the Italian Navy for its underwater commandos from 1938. In contrast with the Radiomir, the Luminor used a luminous material for its dial based on tritium rather than radium, but the greatest and most substantial difference was the system for making the winding crown water-resistant. The Radiomir had a screw-down crown and, since it needed to be unscrewed and screwed up again every time the watch was wound or adjusted, after long use the crown could become worn, running the risk of letting in water. To solve this problem, Panerai designed a completely new device consisting of a lever inserted in a bridge fixed to the case. By moving the lever upwards, the crown was released so that the watch could be wound and the hands adjusted freely; but when the lever was moved down again, it applied pressure to the crown, pushing it against the case itself and compressing the seals to ensure a degree of water-resistance that was otherwise impossible to achieve.
From then on all the Luminor models had the bridge and lever device which, continuously improved over time, can now protect the watch at depths of up to 300 metres and is capable of withstanding even greater pressures, as is demonstrated by the tests to which every example is subjected. These are characteristics which are part of the DNA of the new Luminor Marina Automatic 44 mm. This has its caseband, back and lever bridge executed in brushed steel, with a contrasting polished steel bezel. This contrast between surfaces achieved by different styles of finish is also a feature of the new bracelet, designed not only to enhance the aesthetic value of the watch, but above all to blend more harmoniously with the case. The solution of continuity between the case and the bracelet is in fact almost invisible, as a result of the precise fitting of the first two links between the upper and lower lugs, and also because these links fit perfectly against the caseband, following its rounded shape. The aim of the new design was to create a bracelet that was so naturally integrated with the case that it appears to be a perfect extension of it, as if the case and the bracelet were created at the same time and designed by the same hand. The Luminors were originally made with a long die-cut leather strap and the engineers of Officine Panerai have had to work hard to give the new bracelet the special “suppleness” that is characteristic of leather. This objective has been achieved by the particular way in which the links are shaped; they are asymmetrical and formed with a double-curved surface, so that they are rounded longitudinally, as well as across. This detail means that the bracelet is not only pleasant to the touch, but also very comfortable to wear, due also to the fact that the width of the links reduces from 24 mm wide at the case to 20 mm wide at the closure; and, from an aesthetic point of view, it looks like an integral part of the case.
But there is a further sophistication: the links have a brushed finish, but at the points of contact the steel has been mirror-polished, so as to provide a contrasting finish similar to that of the caseband and the bezel. The new bracelet does not replace either the previous one or the traditional straps of alligator or rubber; it is easily interchangeable with them, giving the client a wide choice.
- Luminor Marina Automatic
Luminor and Marina, two names that bring to mind Officine Panerai’s specialist vocation, the construction of watches designed to be worn often, if not continuously, underwater, and for that reason equipped with an extremely luminous dial.
Created during the Second World War, the Luminor design was a development of the first professional diver’s model in history, the Radiomir, the watch selected by the Italian Navy for its underwater commandos from 1938. In contrast with the Radiomir, the Luminor used a luminous material for its dial based on tritium rather than radium, but the greatest and most substantial difference was the system for making the winding crown water-resistant. The Radiomir had a screw-down crown and, since it needed to be unscrewed and screwed up again every time the watch was wound or adjusted, after long use the crown could become worn, running the risk of letting in water. To solve this problem, Panerai designed a completely new device consisting of a lever inserted in a bridge fixed to the case. By moving the lever upwards, the crown was released so that the watch could be wound and the hands adjusted freely; but when the lever was moved down again, it applied pressure to the crown, pushing it against the case itself and compressing the seals to ensure a degree of water-resistance that was otherwise impossible to achieve.
From then on all the Luminor models had the bridge and lever device which, continuously improved over time, can now protect the watch at depths of up to 300 metres and is capable of withstanding even greater pressures, as is demonstrated by the tests to which every example is subjected. These are characteristics which are part of the DNA of the new Luminor Marina Automatic 44 mm. This has its caseband, back and lever bridge executed in brushed steel, with a contrasting polished steel bezel. This contrast between surfaces achieved by different styles of finish is also a feature of the new bracelet, designed not only to enhance the aesthetic value of the watch, but above all to blend more harmoniously with the case. The solution of continuity between the case and the bracelet is in fact almost invisible, as a result of the precise fitting of the first two links between the upper and lower lugs, and also because these links fit perfectly against the caseband, following its rounded shape. The aim of the new design was to create a bracelet that was so naturally integrated with the case that it appears to be a perfect extension of it, as if the case and the bracelet were created at the same time and designed by the same hand. The Luminors were originally made with a long die-cut leather strap and the engineers of Officine Panerai have had to work hard to give the new bracelet the special “suppleness” that is characteristic of leather. This objective has been achieved by the particular way in which the links are shaped; they are asymmetrical and formed with a double-curved surface, so that they are rounded longitudinally, as well as across. This detail means that the bracelet is not only pleasant to the touch, but also very comfortable to wear, due also to the fact that the width of the links reduces from 24 mm wide at the case to 20 mm wide at the closure; and, from an aesthetic point of view, it looks like an integral part of the case.
But there is a further sophistication: the links have a brushed finish, but at the points of contact the steel has been mirror-polished, so as to provide a contrasting finish similar to that of the caseband and the bezel. The new bracelet does not replace either the previous one or the traditional straps of alligator or rubber; it is easily interchangeable with them, giving the client a wide choice.
-
Brand : Panerai Collection : Luminor Model : Luminor Marina Automatic Reference : PAM00048 Complement : Steel - Aligator Bracelet List Price : 6 600 € Diameter : 40 mm Styles : Sporty Types : Self-winding Calibre : Panerai OP III Calibre distinction : Côtes de Genève COSC certified Chronometer Complication : Small Seconds Case material : Steel Case peculiarity : Screwed-down caseback Crown protector Back in stainless steel Shape : Cushion Water-resistance : 300 meters Dial color : Black Display : Luminescent hands Indexes : Luminescent Arabic numerals Baton-type Glass : Antireflective coating Magnifying glass Sapphire Strap material : Alligator leather Strap color : Brown Strap clasp : Pin buckle More characteristics : Movement
13¼ lignes
Côtes de Genève decoration on the bridges
PANERAI personalised oscillating weight
Glucydur balance
Frequency:
28.800 alternations per hour
Incabloc anti-shock device
Power-reserve of 42 hours
Device protecting the crown in polished steel
Strap with PANERAI personalised buckle